How to conduct an energy walk round
How an energy walk round in your business can identify bad practice, inefficient equipment and poor energy habits.
A walk around can be helpful when managing energy. You can find out where bad practice, inefficient equipment usage, and any poor energy habits are taking place around the building so you can start to fix them. A walk round can help you spot:
- wasteful energy use
- opportunities for savings
- maintenance issues that need to be dealt with
It's a good idea to involve your staff if possible.
Simple energy checks and actions
You should aim to identify areas of energy waste and inefficient use of energy controls by making sure that:
- you can account for the energy used while the building is empty
- energy saving modes are switched on for equipment that has to be kept on all day for occasional use
- lights are switched off when they're no longer needed during the day and when the building is empty
- ventilation fans are switched off in unoccupied areas
- thermostat, timing and lighting control settings are correctly set
It's a good idea to prepare a checklist for your walk round. You could have separate checklists for maintenance and housekeeping or a combined one.
Energy maintenance checks
Poorly-maintained buildings and equipment waste energy and increase your energy bills. On your walk round you should check whether any repairs or replacements are needed and whether energy-using equipment has been properly maintained. You should check whether work is needed to:
- reduce air leaks
- repair broken windows and damaged walls and roofs
- replace damaged or damp insulation
- stop water dripping
- clean windows and light fittings
- replace dirty filters
- balance the heating system
When to conduct an energy walk round
You can do a walk round whenever you think it's necessary but it's best to do one at least once a year and preferably every three to six months. You'll also need to think about doing them at different times of the day as the energy use will vary. This might be:
- when the cleaners are on duty
- at lunchtime
- at night or weekends when you expect to be using little or no energy
- at busy times when you expect to use a lot of energy
Action after the energy walk round
After each walk round:
- analyse the findings
- report results to staff and management
- produce an action plan and implement it
- schedule your next walk round